IQ1000.5
The IQ1000.5 Five Channel Amplifier is an entire system in a single, stunningly simple chassis.
At under a foot long and barely two inches high, this Class D powerhouse is ready to turn your ride into a mobile concert, with all the control and customization of a professional mixer.
The IQ1000.5 delivers 65 watts x 4 at 4Ω and 125 watts x 4 at 2Ω for the AMP1 and AMP2 Channels. The SUB channel delivers 250 watts at 4Ω and 500 watts at 2Ω. See below for more details.
TWEEQ™ IT
All IQ amplifiers come with the revolutionary TWEEQ tuning software. Available as a free app for PC, iOS and Android, this tuning system allows you the freedom to dial in your perfect sound – without buying or installing a separate processor.
Equipped with a simple walk-through configuration process, TWEEQ includes every tool you need to craft a truly excellent sonic environment. A graphic speaker selection menu, +/- 12dB equalizer with 31-bands, adjustable 24dB crossover and time alignment is all included for every channel of the amp. Access the Advanced settings for time delay controls, phase options, a full limiter/compressor, and input mixer to make your sound stage as unique as you are.
Want to TWEEQ your system wirelessly? Simply add the IQI Intelligent Interface and control as many as four IQ amplifiers with Bluetooth®! TWEEQ™
| RMS Power [Watts], AMP1 and AMP2 |
| @ 14.4V, 4Ω stereo, ≤ 1% THD+N : 65 x 4 @ 14.4V, 2Ω stereo, ≤ 1% THD+N : 125 x 4 @ 14.4V, 4Ω mono, ≤ 1% THD+N : 250 x 2 |
| RMS Power [Watts], SUB channel |
| @ 14.4V, 4Ω mono, ≤ 1.5% THD+N : 250 x 1 @ 14.4V, 2Ω mono, ≤ 1.5% THD+N : 500 x 1 |
| Length [in, cm] |
| 11-15/16, 30.3 |
| Height [in, cm] |
| 2-1/16, 5.2 |
| Width [in, cm] |
| 7-9/16, 19.1 |
| Frequency Response [Hz] |
| AMPS 1 and 2: 20-20k SUB: 25-180 |
| Signal-to-Noise Ratio [dB] |
| 95 |
| Input Sensitivity |
| Low Level: 125mV–5V High Level: 250mV–10V |
| Selectable Electronic Crossover |
| AMP 1: OFF/HP; Variable 40Hz–180Hz, 24dB/Octave AMP 2: OFF/HP; Variable 40Hz–180Hz, 24dB/Octave SUB: Variable LP 40-180Hz, 24dB/octave |
| KickEQ™ Bass Boost (end panel adjustable) |
| Variable 0–18dB @ 40Hz |
| KickEQ+™ Parametric Bass Boost (Remote Control Adjustable) |
| Boost : Variable 0-18db Adjustable Center Frequency : 24Hz-80Hz Bandwidth : .5-10 |
| Subsonic Filter |
| 25Hz, 24dB/octave |
| Remote Bass |
| yes |
| Selectable Active Crossover |
| AMPS 1 and 2: Variable High Pass and Low Pass 10Hz–20,000Hz Adjustable Butterworth slope – OFF, 6, 12, 18 or 24dB/octave Adjustable Linkwitz-Riley slope – OFF, 6 or 12dB/Octave SUB: Variable High Pass 10-100Hz, Variable Low Pass 40-200Hz Ajustable Butterworth slope – OFF, 6, 12, 18 or 24dB/Octave Adjustable Linkwitz-Riley slope – OFF, 6 or 12dB/Octave |
| KickEQ™ |
| Graphic 31 Band, 1/3 octave, + or – 12dB |
| Time Delay |
| Adjustable Delay : 0-20ms Adjustable increments : .02ms, .1 ms and 1.0 ms |
| Compressor |
| Adjustable Attack and Release time; Adjustable 1:1 – 10:1 ratio Adjustable Threshold, -80 – 10dB |
| Input Mixer |
| Maps signal inputs to specified speaker outputs |
| CEA Power |
| 500 x 1 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts) |
| CEA Power |
| AMPS 1 and 2: 65 x 4 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts) SUB: 250 x 1 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts) |