Description

• Inputs
• 8 independent high-level channels or 6 independent analog low-level channels
• 2 analog low-level stereo auxiliary inputs
• 1 optical digital input
• 1 electric coaxial digital input
• 1 high-level momentary audio interrupt input (with Mute IN) for use with mobile phone or navigation systems
• Outputs
• 8 independent low-level analog channels and 1 AD Link output
• (8 independent digital audio channels through a single CAT 5.S LAN cable for use with AD Link provided amplifiers)
• Connections
• 1 USB /B (2.0) connector for PC connection
• 2 AC Link control bus connectors for DRC and AC Link amplifiers
• System
• Full range stereo or multichannel signal derived through automatic summing of up to eight high level inputs
• Configuration
• Guided procedure to assign input channels to selected output channels based on inputs, speaker and amplifier configuration
• If necessary, Bit One creates a rear, subwoofer and center channel output (mixed L+R) from a single stereo input
• In/Out Volume
• Input sensitivity automatically adjusted for the main inputs (with supplied Test CD and DVD)
• Manual input sensitivity adjustment for auxiliary inputs
• Independent level control for each output channel for system fine tuning (-40 ÷ 0 dB)
• Equalizer
• Dynamic equalizer: system self-adjusts between low and high listening levels
• Automatic de-equalization of signal fed into the high-level inputs
• (with supplied Test CD and DVD)
• Four separate 31-band graphic equalizers (1/3 Oct.; ±12dB) for each auxiliary inputs
• Eight independent 31-band graphic equalizers (1/3 Oct.; ±12dB) for each of the eight output channels
• Crossover
• Filter Filter typology: Selectable; Hi-pass, Lo-pass, Bandpass, Full Range
• Cut-off frequency: 70 steps available from 10Hz to 20kHz
• Cut-off slope: Selectable; 6 to 48 dB/Oct.
• Alignments: Selectable; Linkwitz or Butterworth
• Mute: Selectable for each output (On/Off)
• Phase: Selectable for each output (0°/180°)
• Time Alignment
• Guided procedure for the inputting of speaker distance with an automated calculation of proper delay times for each channel for accurate time alignment set-up.
• System also provides for manual fine tuning of delay.
• DRC
• Master Volume control, Subwoofer Volume control, Balance control, Fader control, Input selection, Memory selection, Dynamic Equalizer On/Off
• Memory
• 4 presets separately managed and recalled from the DRC Remote Control
• Standard Mode
• Simplified management of crossover and equalization functions for expedient set-up and use
• Expert Mode
• Full management of crossover and equalization functions
• for full reference grade system tuning