Description
KXMA800.5 Amplifier
The KXM 800-watt five-channel amplifier is a full system in a single package. KickEQ+™ delivers an enormous 18dB of variable bass boost while a powerful 24dB crossover lets you quickly tune and tweak your sound. A revolutionary illuminated clip indicator is built right into the gain knob to get the most power without distorting the signal.
A wireless controller is also included for perfecting your sound on the fly. Monitor and adjust gain, bass boost, clipping and more without leaving the driver’s seat!
Features:
- Class D Power Plant
- One-Ohm Stable Bass Channel
- SHOCwave™ Bass Restoration Processor
- KXARC Wireless Remote Included
- Gain Control With “Optimal Input” Indicator
- Variable 24dB Subsonic Filter
- FIT2™ (Fail-Safe Integration Technology) Circuitry
- Variable 24dB Crossover
- DSP-Controlled Preamp
- KickEQ+™ 18dB Variable Bass Boost
- ABYC/NMMA Compliant Power Terminals
- Conformal-Coated Circuit Boards
- Easy Access to Settings behind Gasket-Sealed Cover Panel
- Black Anodized Aluminum Chassis
- Top-Mounted Teal LED Light Pipe
- Stainless Steel Mounting Hardware Included
Want setup help? Go to KICKER U for a free woofer & amplifier configuration app!
This KXM amplifier delivers as much as 100 watts into four full range channels, or 200 watts into two sets of bridged channels. A separate subwoofer channel delivers as much as 400 watts. See below for more details.
| RMS Power [Watts] |
| @ 14.4V, 4Ω stereo, ≤ 1% THD+N: 50 x 4 @ 14.4V, 2Ω stereo, ≤ 1% THD+N: 100 x 4 @ 14.4V, 4Ω bridged mono, ≤ 1% THD+N: 200 x 2 |
| Sub Channel RMS Power [Watts] |
| @ 14.4V, 4Ω mono, ≤ 1.5% THD+N: 200 x 1 @ 14.4V, 2Ω mono, ≤ 1.5% THD+N: 400 x 1 @ 14.4V, 1Ω mono, ≤ 1% THD+N : +/- 10% |
| Length [in, cm] |
| 12-¾, 32.4 |
| Height [in, cm] |
| 2-⅛, 5.5 |
| Width [in, cm] |
| 8-5⁄16, 21 |
| Frequency Response [Hz] |
| AMPS 1 – 2: 10Hz–20kHz SUB: 10Hz-160Hz |
| Signal-to-Noise Ratio [dB] |
| 95 |
| Input Sensitivity |
| 250mV–10V |
| Selectable Electronic Crossover |
| AMP 1: OFF/HP/LP, variable 10–5,000Hz with 10X switch; 24dB/octave AMP 2: OFF/HP/LP/BP, variable HP 10–5,00Hz, variable LP 40–5,000Hz with 10X switch; 24dB/octave SUB: Variable LP 40–160Hz; 24dB/octave |
| Subsonic Filter |
| (amp1) 24dB/octave, variable 10-500Hz, selectable high pass, low pass or all pass, w/10x switch; (amp2) 24dB/octave, variable high pass 10-500Hz, variable low pass 40-500Hz, selectable high pass, low pass, all pass or band pass, w/10x switch for lo pass; (KX.5 sub channel) 24dB/octave, variable 40-160Hz, low pass only |
| Subsonic Filter: |
| Variable 10–80Hz, 24dB/octave |
| KickEQ+™ Parametric Bass Boost (Remote Control Adjustable) |
| Boost – Variable 0-18db Center Frequency-20Hz-80Hz Bandwidth 1-5 |
| Remote Bass |
| Yes |
| CEA Power |
| 50W x 4 @ 4 ohms (10Hz–20,000Hz) 200W x 1 @ 4 ohms (40Hz–160Hz) |
| CEA Signal-to-Noise Ratio |
| -75dB CEA-2006B (ref: 1W, A-weighted) |
Reviews
There are no reviews yet.