Kicker KM10 – Marine Subwoofer

MAKIN’ WAVES

Packed with features and made for specifically for marine use, KICKER gives you the deep, loud bass your boat needs.

FEATURES
• Four-Ohm Voice Coil
• Injection-Molded Polypropylene Cone
• Co-molded Santoprene® Surround
• UniPlate™ Back Plate And Pole Piece
• Thick Tinsel Leads
• Large Ceramic Magnet
• Rear Gasketing Included
• Polymer Basket Resists Corrosion
• Protective Terminal Cap
• Stainless Mounting Hardware Included
• Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
  (ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test)

Want setup help? Go to KICKERU for a free woofer and amplifier configuration app!
*The KM 10-inch Subwoofer works best with a sealed or ported enclosure and 175 watts of recommended power. See below for more details.

Specifications:

Woofer(in,mm)
10, 25
Impedance (OHMS)
4 SVC
Peak Power Handling(Watts)
350
Continuous Power Handling(Watts RMS)
175
Sealed Enclosure Volume Min-Max(ft³, L)
1-2.4, 28.3-68

Vented Enclosure Volume Min-Max(ft³, L)

1.25-1.75, 35.4-49.6

Frequency Response(Hz)

30-500

Mounting Depth(in, cm)

5, 12.7

Hole Diameter(in, cm)

9-3/16, 23.2

Outer Diameter(in, cm)

10-11/16, 27.1

What’s in the Box:

1 – 10″ Woofer 1 – Back gasket 8 – Mounting screws 8 – Mounting screw clips 1 – Manual