Mô tả
MAKIN’ WAVES
Packed with features and made for specifically for marine use, KICKER gives you the deep, loud bass your boat needs.
- FEATURES
- Four-Ohm Voice Coil
- Injection-Molded Polypropylene Cone
- Co-molded Santoprene® Surround
- UniPlate™ Back Plate And Pole Piece
- Thick Tinsel Leads
- Large Ceramic Magnet
- Rear Gasketing Included
- Polymer Basket Resists Corrosion
- Protective Terminal Cap
- Stainless Mounting Hardware Included
- Meets or Exceeds ASTM Standards for UV and Salt/Fog Exposure
(ASTM B117 200 hr. Salt Fog Test) (ASTM G154 400 hr. Accelerated UV Test)
Want setup help? Go to KICKERU for a free woofer and amplifier configuration app!
*The KM 10-inch Subwoofer works best with a sealed or ported enclosure and 175 watts of recommended power. See below for more details.
Specifications:
| Woofer(in,mm) |
| 10, 25 |
| Impedance (OHMS) |
| 4 SVC |
| Peak Power Handling(Watts) |
| 350 |
| Continuous Power Handling(Watts RMS) |
| 175 |
| Sealed Enclosure Volume Min-Max(ft³, L) |
| 1-2.4, 28.3-68 |
| Vented Enclosure Volume Min-Max(ft³, L) |
| 1.25-1.75, 35.4-49.6 |
| Frequency Response(Hz) |
| 30-500 |
| Mounting Depth(in, cm) |
| 5, 12.7 |
| Hole Diameter(in, cm) |
| 9-3/16, 23.2 |
| Outer Diameter(in, cm) |
| 10-11/16, 27.1 |
| What’s in the Box: |
| 1 – 10″ Woofer 1 – Back gasket 8 – Mounting screws 8 – Mounting screw clips 1 – Manual |
Đánh giá
Chưa có đánh giá nào.